Public blockchain data only — we never ask for seed phrases, private keys or upfront fees.
No wallet data stored Runs in your browser
All 30 guides
Crypto 2026-09-24 · 13 min read

How to Trace Stolen Crypto: A Complete Step-by-Step Walkthrough

Tracing stolen crypto is a skill anyone can learn in an afternoon. Here is how to follow funds hop by hop, the difference between a trace and a claim, how to write a trace that investigators can verify, and what to do with it once it is finished. The deposit address is the handover point, and identifying which exchange received stolen funds covers the tracing method that gets you there. If you want the wider method behind the steps below, our guide to cryptocurrency tracing explains how investigators follow funds across chains and where a trace stops being useful.

How to trace stolen crypto: a hand pointing at a node in a transaction flow diagram on a monitor in a dark room

Anyone Can Trace. The Skill Is Writing It Down.

Why a checkable record matters more than a sophisticated one.

Safety note: we never guarantee recovery and never ask for seed phrases, private keys, crypto payments or upfront unlocking fees. Anyone who does is running a second scam.
The short version

How to Trace Stolen Crypto: The Eight Steps

  • Tracing stolen crypto is a learnable skill. You follow funds one hop at a time and record what you see in a format someone else can verify.
  • The value of a trace is that it is checkable, not that it is sophisticated. Anyone can confirm each step independently.
  • A trace shows where funds went. It does not identify who controlled the addresses, and that distinction matters.
  • Stop when tracking becomes impractical and say so. A clear boundary is more useful than speculation.
  • The finished trace supports a freeze request, a police report, an IC3 filing and a civil claim.

Tracing stolen crypto is not a specialist skill. It is a method: follow the funds one hop at a time, record each step, and stop when tracking becomes impractical. What makes a trace valuable is not its sophistication but its verifiability, because anyone can take your list of addresses and hashes and confirm each step independently.

This walkthrough covers the method for both account-based chains and UTXO chains, how to write the result so an investigator can use it, and what to do with it once it is finished.

The method in one paragraph

Start with the transaction that took your funds. Identify the address that received them. Open that address in a public explorer and look at where its funds went next. Record the next address, the amount and the timestamp. Repeat.

That is the whole method. Everything else is detail about how different chains structure their transactions, and how to write the result down so it can be checked.

The method is simple and the discipline is in the recording. A trace that is not written down in a checkable format is not a trace; it is a memory.

Account chains versus UTXO chains

Chains fall into two families, and they behave differently when you follow funds. Account-based chains like Ethereum and Tron keep a balance per address, so following funds is a matter of looking at outgoing transfers. UTXO chains like Bitcoin track unspent outputs, so a single payment can split across several outputs.

The UTXO model is where beginners go wrong. Following the wrong output produces a trace that leads back to the victim's own wallet, which is both useless and confusing.

How the two chain families behave when tracing
Account chains (ETH, TRON)UTXO chains (BTC)
Unit of valueA balance per addressUnspent outputs
Following fundsLook at outgoing transfersIdentify the correct output
Common errorMissing an internal transferFollowing the change output
SplittingOne transfer, one destinationOne transaction, several outputs
Practical tipCheck for contract-mediated transfersMatch the amount to find the payment output
How the two chain families behave when tracing

On a UTXO chain, if your trace leads back to an address you control, you have followed the change output. Go back and identify the output that matches the amount you were told to send.

The eight steps

This is the sequence to work through. It applies to both chain families, with the output-matching step specific to UTXO chains.

Work in order and do not skip the recording steps. The recording is what turns a browsing session into evidence.

  • 01Find the transaction hash or ID of the transfer that took your funds.
  • 02Open it in a public explorer and confirm the receiving address and amount.
  • 03On a UTXO chain, identify the output that matches the amount you sent.
  • 04Open the receiving address and list its outgoing transfers.
  • 05Record each destination address, amount and timestamp.
  • 06Repeat for each hop, following the largest or most consistent flow.
  • 07Flag any address that looks like a deposit into a centralised exchange.
  • 08Stop when tracking becomes impractical, and state where and why you stopped.

Flag the exchange deposit addresses specifically. Those are the only hops that can be frozen, and they are the ones a compliance team will act on.

How to write a trace someone else can verify

A trace is only useful if someone else can check it. That means every step must be independently verifiable from the public ledger, with no gaps and no guesses presented as facts.

Write it as a numbered list. One line per hop. Date, amount, address, and the transaction hash that connects it to the previous step. Add a short note where you made a judgement call, and say that it is a judgement call.

What each line of a trace should contain
FieldWhy it is needed
Date and timeEstablishes the sequence
Amount and assetConnects the hop to the previous one
AddressThe verifiable identifier
Transaction hashLets anyone confirm the step independently
Note on judgementDistinguishes observation from inference
Stop point and reasonShows the trace is honest about its limits
What each line of a trace should contain

Mark your inferences as inferences. An investigator can work with a clearly labelled assumption; they cannot work with a guess presented as a fact.

What to do with the finished trace

A finished trace is the input to four things: a freeze request, a police report, an IC3 filing and a civil claim. Each uses the same document with a different covering note.

The freeze request is the only one with a deadline, so it goes first. The others can follow over the next day or two.

  • 01Send the trace to any exchange compliance team with a deposit address in it, and ask for a freeze.
  • 02Attach it to a police report with a one-page written statement.
  • 03Attach it to an IC3 filing at ic3.gov.
  • 04Attach it to an FTC complaint at ReportFraud.ftc.gov.
  • 05Keep a copy for any lawyer consultation or civil claim.
  • 06Store the whole set in two places, one of them offline.

One well-documented trace sent to the right compliance desk outperforms a hundred pages of diagrams sent to nobody. Specificity is what makes it actionable.

The limits of a trace

A trace shows where funds went. It does not identify who controlled the addresses, and that distinction is where most victims' expectations outrun what is achievable. A trace that ends at an exchange deposit address identifies an institution, not a person.

It also cannot reverse anything. The ledger records transfers; it does not undo them. The only point at which funds can be stopped is when they sit at a regulated intermediary that can freeze them.

What a trace establishes, and what it does not
A trace establishesA trace does not establish
Where the funds moved, verifiablyWho controlled the addresses
That funds entered a specific exchangeThat the account holder is the fraudster
A dated sequence of transfersThat any recovery is possible
A checkable record of the lossThat an investigator will act on it
The point at which tracking became impracticalThe identity of the operator
What a trace establishes, and what it does not

A trace is the foundation, not the conclusion. It is what makes every later step possible, and it is the part you can complete yourself today.

The tools you actually need

Tracing requires less tooling than people expect. A public block explorer, a spreadsheet and a text document will carry you through most of it. Paid analytics platforms add convenience and clustering, and they are not required to produce a trace that an investigator can verify.

What matters is that every step is checkable from a public source. A trace built on a paid platform's proprietary labels is harder to verify than one built on raw ledger data, because the reader cannot reproduce the labels.

What each tool contributes
ToolWhat it gives youNeeded?
A public block explorerRaw transactions, addresses, timestampsYes, essential
A spreadsheetAn ordered record of hopsYes, for anything beyond a few hops
A text documentThe written trace you will sendYes, this is the deliverable
A paid analytics platformClustering and labelsOptional, and harder to verify
A second explorerCross-checking a disputed stepUseful for confirmation
What each tool contributes

Build the trace from raw ledger data and cite the explorer you used. A reader who can reproduce every step independently is a reader who can act on it.

A worked example of a written trace

The clearest way to show what a finished trace looks like is to write one out. The example below is fictional, and the structure is the part worth copying: one line per hop, every line independently checkable, and a clearly marked stop point.

Notice that the trace does not claim to know who anyone is. It records what the ledger shows and labels the one inference it makes.

A written trace, as it should be sent
HopDateAmountAddressTransaction
12026-03-04 14:222.40 ETH0x8a1f…c2040x3d9b…e771
22026-03-04 14:412.40 ETH0x51ce…a8b30x77f2…b019
32026-03-05 09:072.39 ETH0x2b90…f4d10x9c14…8e2a
42026-03-05 09:122.39 ETH0x6e33…d7a00x1a8f…c5b6
52026-03-06 11:552.38 ETHExchange deposit0x4f70…a2c9
A written trace, as it should be sent

Hop 5 is the one that matters. It is the only hop where an institution can act, and it is the reason the trace is worth writing at all.

Crypto Tracing: Questions Before You Start

Yes. The method is to follow the funds one hop at a time from the transaction that took them, recording each address, amount and timestamp. What makes a trace valuable is that it is checkable, not that it is sophisticated.
You have followed the change output on a UTXO chain like Bitcoin. A single transaction can produce several outputs, and one returns change to the sender. Identify the output that matches the amount you were told to send.
Until tracking becomes impractical, which is usually when funds reach a large service or split across many addresses. Stop there and state where and why you stopped. A clear boundary is more useful than speculation.
It is the input to every route that can. A freeze request, a police report, an IC3 filing and a civil claim all depend on a documented trace. It cannot reverse a transaction by itself.
Usually not. A trace identifies addresses and, at best, an exchange deposit. Identifying a person requires the exchange to act on a lawful request, which is why the freeze request and the police report matter.
Send it to any exchange compliance team with a deposit address in it and ask for a freeze, then attach it to a police report, an IC3 filing and an FTC complaint. Keep a copy for any legal consultation.
Next step

Start your trace now

Paste the receiving address into the tracer and export a dated hop record you can attach to a freeze request, a police report and an IC3 filing.

Primary sources and further reading

External links open in a new tab and are provided so you can verify the underlying material yourself. TrueMoneyTalk is not affiliated with these organisations.

More on tracing funds across chains

Share this guide

Someone you know may be in this situation right now.

Disclaimer: this guide is general information, not legal, financial or recovery advice, and it is not a substitute for advice from a licensed professional in your jurisdiction. Individual outcomes vary and are never guaranteed.