Revoke Token Approvals: What It Means and How to Do It
An approval is the most consequential thing most people do on a blockchain without noticing. It costs a fraction of a cent, moves nothing, and can hand a stranger permanent access to everything you hold in a token. Understanding what you granted is the difference between a wallet that is safe to keep using and one that is a standing invitation.
An approval is a key you hand over, not a payment you make. It costs almost nothing, moves nothing, and can empty your balance months later without another signature from you.
The Short Version
- An approval grants another address permission to spend your tokens up to a limit. It is not a transfer.
- "Unlimited" approval is the default in most DeFi interfaces and is what drainers exploit.
- You can see every approval on your address in one tab on any EVM explorer.
- Revoking sets the allowance back to zero and costs a small gas fee per token.
- Revoking stops a future drain. It does not reverse a drain that already happened.
What an Approval Actually Grants
On an EVM chain, your tokens are not held by your wallet in the way a bank holds a balance. They are held by the token's smart contract, in a mapping from your address to an amount. To move your tokens, a contract calls transferFrom on that mapping, and the contract will only succeed if you have previously authorised the caller.
That authorisation is the approval. It is a separate transaction that sets a value in a second mapping: from your address, to a spender address, an allowance. Once set, the spender can move up to that allowance at any time, without any further action from you, without your wallet being online, and without you seeing a prompt.
Three properties follow, and each one matters.
- It is persistent. An approval does not expire. It stays in effect until you change it or the token contract is upgraded.
- It is per token, per spender. Approving USDC to one contract does not approve USDT, and does not approve a different contract.
- It is silent. Nothing notifies you when an approval is used. The first sign is usually a missing balance.
Unlimited Approval: The Default That Bites
When you approve a token in most DeFi interfaces, the default is not the amount you are about to spend. It is the maximum value the type can hold — 2^256 minus 1, a number with 78 digits. This is called an unlimited or infinite approval.
The reason is gas. Setting an allowance from zero to a non-zero value costs more than changing one non-zero value to another. By approving the maximum once, an interface saves you a small fee on every future interaction with that contract. It is a genuine convenience, and it is why the default exists.
The cost of that convenience is that a single malicious or compromised contract gets access to your entire balance of that token, forever, rather than to the amount you intended to spend.
| Approval type | What the spender can take | Risk |
|---|---|---|
| Exact amount | Only what you approved | Low — the exposure is bounded |
| Unlimited | Your entire balance, now and in future | High — exposure grows as you deposit more |
| Permit signature | Same as an approval, but off-chain and gasless | High — leaves no obvious transaction to review |
The permit variant deserves a note. EIP-2612 lets a token holder sign an approval off-chain, which a contract then submits. It costs no gas, which is why some interfaces prefer it, and it means there may be no approval transaction in your history at all — only a signature you may not remember giving. If you have signed a "permit" prompt on an unfamiliar site, treat it as an approval.
How to See Every Approval on Your Address
You cannot revoke what you cannot see, and most people have far more approvals than they expect — one per token per protocol, accumulated over years.
Two ways to list them.
Block explorer. On Etherscan, open your address and use the "Token Approvals" tab. It lists every token, the spender address, the allowance and the date granted. On other EVM chains the equivalent explorer has the same view. This is the authoritative source because it reads the contract state directly.
Dedicated revoke tools. Several sites aggregate approvals across chains into one dashboard and let you revoke in bulk. They are convenient, and they are also a phishing target — a fake revoke site is a well-known attack. Use one only if you reached it from a source you trust, and verify the URL character by character.
When you read the list, sort by allowance rather than by date. Unlimited approvals to contracts you no longer use are the ones worth clearing first, because they are both high-exposure and low-value to keep.
Revoking on Each Major Wallet
Revocation is a transaction, not a setting. You are calling the token contract and setting the allowance to zero, which costs gas. The mechanics differ slightly by wallet but the pattern is the same.
MetaMask. MetaMask does not have a built-in approvals manager. Use the explorer's token approvals tab or a revoke tool, and confirm the transaction in MetaMask like any other. Expect one transaction per token.
Rabby. Rabby shows a "Approvals" view inside the wallet and flags risky approvals before you sign new ones. It is the most direct route because the revoke happens without leaving the wallet.
Trust Wallet and mobile wallets. Most mobile wallets do not expose approvals. Use the explorer on a desktop browser, or a revoke tool, and confirm on the phone.
Hardware wallets. The device signs the revocation like any other transaction. Nothing changes except that you must confirm on the device.
| Step | What happens | Cost |
|---|---|---|
| 1. Open the approvals list | Read-only, no wallet connection needed on an explorer | Free |
| 2. Select a token and spender | Choose "revoke" or set allowance to 0 | Free |
| 3. Confirm the transaction | A contract call setting the allowance to zero | Gas, usually a few dollars |
| 4. Wait for confirmation | The allowance is now zero on chain | — |
Revoking many tokens at once costs many transactions. On a congested chain that can add up, which is why the practical advice is to revoke the high-exposure ones first rather than clearing everything in one session.
Why Revoking Is Not the Same as Recovering
This is the sentence that matters most in this guide, and it is the one people skip.
Revoking removes a permission. It does not return anything that permission already took. If a drainer used your approval last week to move 4,000 USDC, revoking today changes nothing about that transfer — the tokens are gone, and the revocation only prevents a second withdrawal from whatever remains.
What revoking does achieve is real, though, and worth being precise about:
- It stops a repeat drain. Many drainers leave the approval in place and return weeks later, or sell the approval to another operator. Revoking closes that door.
- It protects future deposits. An unlimited approval applies to tokens you receive later. If you top up the same token, the old approval covers the new balance too.
- It is evidence of diligence. In a report, "I revoked the approval on the same day" is a fact that supports your account of events.
If the drained funds were a stablecoin, there is one further step worth taking: report the spender address and the receiving address to the issuer. Tether and Circle can freeze balances on a valid law enforcement request, and a revocation record strengthens the timeline you present.
Revoking After a Drain: What It Does and Does Not Fix
If you have already been drained, the sequence is short and the order is not optional.
Step 1: revoke everything suspicious. Not just the token that was taken. A drainer often obtains several approvals in one session, and the ones that were not used yet are the ones that will be.
Step 2: move remaining assets to a new wallet. Generate a fresh wallet from a clean device and transfer what is left. Do not reuse the compromised address, even after revoking — if the compromise came from a signed permit you have forgotten, the address is not trustworthy.
Step 3: record the evidence. The approval transaction, the spender address, the transferFrom transaction and the receiving address. These four items are what a report needs.
Step 4: report. IC3, and the wallet provider if the drainer contract was flagged by them. Chain-analysis firms maintain blocklists that wallets and exchanges consult, and a report can get an address added.
What none of this fixes is the loss itself. There is no chargeback on a self-custody transfer, no counterparty to dispute with, and no mechanism to reverse a confirmed transaction. Anyone who tells you otherwise — for a fee, usually payable in crypto — is describing a service that does not exist.
Checking Approvals Monthly
The habit that prevents most drainer losses is not technical. It is a five-minute review once a month.
Put it on a calendar. Open the token approvals tab for each address you actually use. Sort by allowance. For each unlimited approval, ask one question: do I still use this protocol? If the answer is no, revoke it. If the answer is yes, consider whether an exact-amount approval would do the job instead.
Three signals should trigger an immediate review rather than a monthly one:
- A protocol you used announces a contract migration. Old contracts often keep their approvals live, and a deprecated contract is a target.
- You signed something you did not fully understand. Review within the hour, not the month.
- A token you hold announces a contract upgrade or a migration. Approvals may or may not carry over, and the answer is worth knowing.
Our free wallet tracer flags live approvals on an address alongside the balance and activity view, which turns the monthly review into a single lookup. If you are unsure whether an address has already been compromised, the compromised wallet guide covers the signs to look for.
Questions people ask
What does it mean to revoke a token approval?
It means setting the allowance a contract has over your tokens back to zero, so it can no longer move them. It is a transaction on the token contract and costs a small gas fee. It removes a permission; it does not return anything already taken.
Is it safe to revoke approvals?
Yes. Revoking only removes a permission you granted. It cannot move funds, cannot grant new access, and cannot affect tokens you have not approved. The only cost is gas, and the only risk is using a fake revoke site — always reach one from a source you trust.
What is an unlimited token approval?
An approval set to the maximum value the type can hold, which lets a contract spend your entire balance of that token indefinitely. It is the default in most DeFi interfaces because it saves gas on repeat use, and it is what drainers exploit.
Can I get my tokens back after a drain?
No. A confirmed transfer on a self-custody wallet cannot be reversed by anyone. Revoking stops a second drain and protects future deposits, but the tokens already moved are gone unless they reached a centralised platform that can act on a legal request.
How often should I check my approvals?
Monthly for addresses you actively use, and immediately after signing anything on an unfamiliar site. Also review when a protocol you use announces a contract migration, because old contracts often keep their approvals live.
Check the address before you send anything
A free scan reads public chain data in your browser: balance, activity, counterparties and flags. No wallet connection, no seed phrase, no signup.
Primary sources and further reading
- ERC-20 specification — the approve and transferFrom functions behind allowances
- EIP-2612: Permit extension — gasless off-chain approvals via signature
- Ethereum developer documentation — token standards and contract interaction
- FBI Internet Crime Complaint Center — federal reporting portal for crypto fraud
Related guides
Information only. We never promise recovery.